Ghost Immobiliser Fitting
Protect your vehicle from key theft hacking, cloning and theft by using the first aftermarket CAN immobiliser. With the added option to link to a Ghost app and GPS tracking system that can send you alerts to call when your car is altered with or stolen.
Installing an Ghost immobiliser is a breeze for the qualified technician. Making use of the correct tools, insulation tape and heat shrink tubing is crucial.
Getting Started
Ghost immobilisers are a great alternative to physical theft protection devices like wheel locks and car alarms. They safeguard your vehicle without the use of LED indicators or key fobs. Instead they connect directly to the ECU's CAN network and can only be started after entering a PIN sequence. This provides a more secure level of security against key hacking, cloning and even ECU swapping.
Therefore, the installation of a ghost immobiliser Birmingham has to be done with great speed and accuracy. It's like tiptoeing through the minefield. A single mistake could cause irreparable damage to the circuits of your vehicle's electrical system. It is important to understand the installation procedure and prepare your vehicle correctly.
It is necessary to remove interior panels from the vehicle to make room for your immobiliser. Once you have found the ideal location to conceal it, use cable ties to fix it. Clean up your wiring by connecting loose wires and using insulation tape to cover any exposed connections. This can help reduce the risk of accidental short circuits, while improving the aesthetics and decreasing the possibility of tampering with by thieves.
Then, locate a source of constant 12V power as well as a grounding location for the ghost immobiliser. Once you have located them test the power cables using a multimeter. Connect the CAN H & the CAN L wires from the immobiliser with the grounding and power points.
After you've made all the connections required It is important to check the connections and examine the immobiliser for indications of corrosion or damage. The process of entering a PIN and launching the car is a great method to test the system. This should be part of your daily routine, as it will allow you to identify any issues that are intermittent early. Regular testing can help prolong the life of your device and keep it performing at its best.
Preparing your vehicle
Installing a Ghost immobiliser requires the right knowledge and tools. A wiring diagram is essential for finding the correct wires, establishing precise connections and ensuring safety. A multimeter can be used to verify electrical values and ensure security. Insulation tape and cable tie can be used to secure the connections and prevent being tampered with. A user's manual will give you specific instructions tailored to the Ghost Immobiliser model you have.
Once installed, the ghost immobiliser will stop engine starts that are not authorized by requiring that the owner input a unique code sequence using the buttons on the steering wheel or console. The code can be altered at any time by the vehicle owner either by hand or remotely through a mobile app. The device is also silent and unnoticeable by thieves as it does not emit radio frequencies.
A ghost immobiliser is connected to the CAN bus of the vehicle, a network which communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals from the ECUs and prevents the engine from starting when a false signal is detected. The system is weatherproof and tamperproof. It does not have LED indicators or keys to draw thieves' attention.
It can be mounted behind the dashboard or in an inconspicuous area, so it is not visible to thieves and doesn't hinder the performance of the vehicle. It is also possible to put it in a small container which makes it less likely to be spotted during a test drive by unscrupulous car salespeople.
Its stealthy operation, along with its integration into the vehicle's CAN-bus system, can be a powerful deterrent to modern vehicle theft techniques like signal relay attacks and key copying. Combining the system with other security measures will create a formidable barrier that will deter even the most persistent of thieves. This is why more insurance companies are now advocating or even requiring ghost immobilisers to be fitted, as they can drastically reduce monthly premiums.
Making Connections
Ghost immobilisers are completely silent, unlike traditional security systems which can be heard by thieves. They stop thieves from knowing that your vehicle is running. They also stop high tech methods of theft, like OBD hacking. They can also be fitted without causing permanent marks in your car, making them an excellent option for those who are planning to sell their vehicle in the near future.
The Autowatch Ghost 2 is a immobiliser for CANbus that is one of the most reliable and modern solutions to stop car theft. It disables your engine using the CAN data network and generates a unique PIN code that is difficult for criminals. It is compatible with a wide range of vehicles, and it works with many features already installed including car alarms, steering wheel locks, GPS trackers, and door lock bypass.
If you decide to go with a Ghost immobiliser, make sure to refer to the wiring diagram of your specific vehicle model to identify the wires that need connecting. Make sure to double-check the location of these wires to ensure that they are in the correct location and mark them using labels or tape to make it easier to keep the track of them. It is also necessary to locate a source of continuous power (12V) and an earthing point for the system. Once you have the necessary components, you can start making the connections to complete the installation.
ghost immobiliser 2 will not allow your vehicle to start unless the pin code is entered via the buttons on the dashboard or steering wheel. This will stop ECU hacking keys cloning, hacking, and other techniques of theft. It can also be paired with other Thatcham approved security accessories such as alarms and tyre clips to give your car an additional degree of security.
As the UK automotive aftermarket market grows, so do the options to secure your vehicle. With so many options for thieves to get in and take your car it's essential to do everything you can to prevent it from being stolen. That's why ghost immobilisers have become an extremely popular option for responsible car owners.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU through the CAN network. This stops the engine from starting until a PIN code has been entered. This makes it extremely difficult for thieves to steal your key fob and then start your car, and more difficult to disable the system by hacking into its electronics.
Ghost Immobilisers are also able to be used together with GPS tracking devices that will help you track your vehicle's location and identify it if it's stolen. This feature is not commonly found in aftermarket security products however it is an excellent way to improve your vehicle's security and provide you with peace of peace of.
The Ghost-II immobiliser is not just a source of greater security, but also provides a more convenient experience for the user by not having to use additional key fobs or devices. It has an easy and intuitive PIN code entry system that is seamlessly integrated into your everyday routine. It also offers options for deactivation and features that let you temporarily disable the immobiliser for valet parking or servicing.
Before beginning the installation process, you should familiarise yourself with your vehicle's wiring and prepare the tools. A basic set will allow you to make precise connections. A multimeter is a tool to test electrical values. Insulation tape and heat shrink tubing are also essential for protecting connections from short circuits, while cable ties can be used to secure the wiring in the right place. It is also essential to work in an area that is well-lit, and wear safety equipment when working with electrical components and tools.
You should test the Ghost immobiliser after you have completed the installation to ensure it's functioning properly. It is recommended to first start the vehicle without entering the PIN. If this fails, you'll have to test the system again and perform a more thorough inspection of the connections.
In contrast to other security systems that are available, unlike other security systems, the Ghost Immobiliser is a covert device that is not spotted by thieves and is far more effective than traditional physical deterrents like wheel clamps or steering locks. It is TASSA-approved and recognized by some insurance companies. This is a cost-effective investment that provides you with the peace of heart you deserve.
