Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN buses. It is discreet and does not have LED indicators or key fobs, and is hidden in the vehicle's wiring.
It also allows users to turn off the system temporarily through Transport Mode for when they are renting their vehicle. This guide will guide you through the installation process of the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key cloning attacks, hacking attacks and relay attacks. The system connects directly to your car's ECU and is protected by a unique PIN code of your choice. It is undetectable by thieves using diagnostic scanners or other modern methods. It is not able to be disabled with circuit cuts.
The system is simple to use, but professional installation is recommended to ensure a clean connection to the ECU of your vehicle. A certified installer from Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking system or alarm to complete the protection package for your vehicle.
The first step is to disconnect your battery to prevent accidental airbag deployment or short circuits. When the battery is disconnected, the installer may safely begin working. Basic hand tools are helpful for securing connections with precision and a multimeter can be used to verify the electrical properties and safety. Insulation tape and cable ties are also essential for protecting connections and keeping wiring neat. The Ghost Immobiliser user's guide will give specific instructions that are tailored to your model.
During the installation process, it's essential to choose a grounding point that's free of any paint or debris. The installer must be sure that the immobiliser's H and CAN L wires are connected to the correct ports on your vehicle's ECU. The wires can be connected or soldered, depending on the model. To ensure a reliable and long-lasting connection it is recommended you choose a top-quality plug.
Transport Mode can be activated by the customer once the installation is complete. This allows mechanics or valet parking to use the vehicle, without having to know the pin code. To do this, the customer must hit the button for service on the dashboard 5 times in a matter of 2 seconds. After this is done the system will confirm with 5 signal indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's a great option for those who regularly rents out their cars on platforms like Turo. An immobiliser can cut down on insurance rates, as it decreases the likelihood of theft.
Getting Started
If you are seeking a solution to safeguard your vehicle from theft You can't go wrong with an autowatch ghost immobiliser. The device prevents your vehicle from running even if someone steals or copies your key. It is possible because of its advanced technology that prevents the engine from starting until the correct PIN code is entered.
The device is connected to the vehicle's bus network, CAN which allows direct communication with the ECU. It uses the buttons on your dashboard and steering to create a unique sequence, which only you know. This makes it impossible for anyone else to start your car. This is the ultimate system to protect your pride and joy. It will ensure that your car's value remains intact should you ever decide to sell it.
Installing a ghost immobiliser can be a simple process, but it is crucial to follow the instructions carefully to avoid problems with the electrical system and malfunctions. You'll need to locate a power supply of 12V and a suitable grounding for the chassis of your car. After that, you can begin connecting the wires for the immobiliser. Make sure to use high-quality connectors and soldering techniques to ensure a solid connection. Insulate the connections using heat shrink tubing or insulation tape, as well as other materials to prevent short circuits of electricity.
After the wires are connected, you are able to connect the battery and begin the engine to check whether the immobiliser works. After you've confirmed that everything is functioning properly then you can put the immobiliser in a safe location in the vehicle. Make sure you hide it in a secure manner to prevent a thief from tampering with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified, which means that it is in compliance with the highest standards of security and is a great protection against car thieves. It provides superior protection against key cloning, hacking, and relay attacks, and isn't able to be disabled unless you know the code. The device is simple to use and can be set into the service valet setting to ensure that your vehicle will not be activated if you take it for an MOT or service.
Wiring
The Ghost Immobiliser is a cutting-edge security system that's designed to stop theft of vehicles. It communicates with your vehicle's ECU and connects directly to the CAN bus. Unlike other aftermarket systems that require the removal of circuit components The Ghost Immobiliser does not interfere with any of the factory settings of your vehicle.
It's also completely undetectable to thieves using diagnostic scanners. The system doesn't transmit or receive radio frequency signals but instead uses CAN data for communication with your ECU. Additionally, it doesn't require any modification to your vehicle's existing key fobs.
Enter your disarm sequence (either two or one buttons) and then switch on the ignition of your car to use Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. You can now start your vehicle and drive safely.
Once installed Once installed, the Ghost Immobiliser will protect your car from hacking and key cloning while preserving the value of your car's pride and joy. In Transport Mode, you can temporarily disable the Ghost Immobiliser when you have to hand your vehicle to service or valet park.
You'll need a constant power source (12V) as well as an earthing point to complete the installation of the Ghost immobiliser. Be sure that both are well-insulated and can be touched. It's also recommended to use cable ties to bundle and secure the wires. This reduces the risk of theft by thieves. Make sure visit this page check the exact locations of these points to avoid making mistakes and mark them with a piece of tape or label. Verify every connection for signs that they're wearing out. Loose connections can lead to malfunctions in the system, so make sure they're securely in place and securely insulated. Make sure to test your Ghost Immobiliser once the installation is completed. This will confirm that the unit is operating correctly and that all connections and insulation are safe. If there are any issues, make sure to resolve them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that integrates seamlessly into your car's ECU to stop unauthorized engine start. The innovative technology protects your vehicle from hacking and key cloning and other methods employed by thieves to steal cars. The Ghost also works in conjunction with other alarm and tracking systems to provide the ultimate vehicle protection. The Ghost's unparalleled features, combined with its subtle design makes it a sought-after choice for car enthusiasts and security conscious drivers.
It is crucial to follow the procedures for installation to ensure a correct integration of the Ghost Immobiliser. The best place to start is to consult the vehicle's wiring diagram that serves as a guideline for locating and connecting the wires required. ghost immobiliser problems is to determine the grounding and power sources. Once these are found you'll have to mark them in a way that they're easily identifiable during the installation process. It is also important to use top-quality tools and materials. Basic hand tools can assist with making precise connections, while a multimeter will verify electrical values and ensure security. Insulation tape and cable tie ensure that all connections are neat. Also, a user's guide will provide specific instructions specific to your Ghost model.
It is crucial to test the system prior installing it. Enter the PIN code into the system, and then start the vehicle. This step will confirm that the immobiliser functions according to plan, and prevents unauthorised vehicle start-ups. It's recommended to perform this procedure regularly as part of your routine inspections of the vehicle to ensure the system is working properly.
After the installation has been completed, you are now able to start driving your vehicle with confidence. The Ghost will guard your car from thieves who might steal your car. It will ensure that no one is able to take your car away even if they don't have the correct PIN code. The Ghost can be used in conjunction with an approved Thatcham tracker, which detects attempts at theft or tampering. This allows you to track your car in the event that it's stolen.
The Ghost is compatible with a range of vehicles, including those from most major manufacturers. Monty's Locksmith can help you secure your vehicle using this cutting-edge device. Contact us today to find out more about our services and installation options. We are a TASSA Installer who is registered, a certification that guarantees that we follow strict standards and procedures for installing our products. This guarantees customers insurance companies, customers, and law enforcement agencies that installations are performed safely and properly.